Motor supports both sensored and sensorless operation For connection to VESC: 6‑pin adapter cable required (2.0 mm female to 1.5 mm male ESC sensor wire) Sensor Wire Configuration: Red=5V, White=Temp, Blue=A, Yellow=C, Green=B, Black=GND
| Max Current | 75 A |
| Input Voltage | 4–12S |
| Max Torque | 5 Nm |
| Internal Resistance | 0.05 Ohm |
| Recommended ESC | 3–12S 50A |
| Motor Net Weight | 860 g (1.9 lb) |
| Motor Diameter | 63 mm |
| Motor Length | 74 mm (Φ2.5×2.9 inch) |
| Shaft | Diameter 8 mm (0.31 inch), length 30 mm, 3×1.5 mm keyway |
| Motor Wires | Default 12AWG silicone wire with 4.0 mm banana connector (male); 5.5 mm gold-plated connector available upon request |
| Wire Configuration | Blue=A, Black=B, Yellow=C |
| Stator | 0.2 mm imported Japanese silicon steel sheet |
| Magnet | N42SH high-temperature grade magnet |
| Hall Sensor Wire | Standard RC sensor wire JST‑ZH 6‑pin 1.5 mm pitch / 2.0 mm 6‑pin; internal PCB with 120° Hall effect sensors |
Motor supports both sensored and sensorless operation For connection to VESC: 6‑pin adapter cable required (2.0 mm female to 1.5 mm male ESC sensor wire) Sensor Wire Configuration: Red=5V, White=Temp, Blue=A, Yellow=C, Green=B, Black=GND
8.4V22kg-cm Hight Voltage Digital Servo
OR83E Inspection Motor
OR63E Replacement Motor
OR63A8 Freestyle FPV motor
OR50A5 Outrunner RC DC Motor for Electric Skateboard
XQ5065 Outrunner RC DC Motor for Electric Skateboard
XQ6354 2450w Brushless Outrunner with Hall Sensor Motor for Electric Skateboard
